Characters explanation
Ws= Load capacity of the swivel castor
Wf= Load capacity of the fixed castor
WT=Maximum weight to be carried
P= Deadweight (tare) of the trolley
Below we present you all the possible options concerning Castors mounting:
Option A
2 fixed + 1 swivel It is preferable for small flexible constructions with light weights. The handling is done from the side of the swivel castor. Ws= (WT+P) x 0,4 Wf= (WT+P) x 0,35 |
Option B
2 swivel + 2 fixed at the edges of the trolley It is preferable for relatively high loads and long distances. The handling is done from the side of the swivel castor. Ws= (WT+P) x 0,35 Wf= (WT+P) x 0,35 |
Option C
4 swivel at the edges of the trolley It is preferable for applications which demand maximum flexibility, but in case of heavy loads it is not highly recommended for long distances. The handling is done from any side. Ws= (WT+P) x 0,35 |
Option D
2 swivel + 2 fixed in the middle of the trolley sides It is preferable for flexible constructions for long distances on floors with channel and ramps. The fixed castors are usually placed higher than the swivel, so that the construction is being balanced on them. The handling is done from the side of the swivel castors. Ws= (WT+P) x 0,35 Wf= (WT+P) x 0,50 |
Option E
2 fixed in the middle of the long sides + 4 swivel at the edges of the trolley. It is preferable for flexible and stable constructions for long distances on floors with channel and ramps. The fixed castors are usually placed higher than the swivel, so that the construction is being balanced on them. The handling is done from the side of the swivel castors. Ws= (WT+P) x 0,35 Wf= (WT+P) x 0,50 |
Option F
3 swivel at triangle disposition It is preferable for circular trolleys or barrels. Ws= (WT+P) x 0,35 |
Note:
In options D and E the fitting top plate of the swivel castors should not be in parallel position with the floor of the trolley, but it must have the appropriate inclination, so as to be in horizontal position, while the wheel is in contact with the ground.
tan a = dh/dfs, where
dh= total height difference with swivel and fixed castors.
dfs= distance in between the center points of the fitting top plates of the swivel to the fixed castor.